Krinner K67 94710 15.4" Tree Stand-Green, Plastic Metal, M

FREE Shipping

Krinner K67 94710 15.4" Tree Stand-Green, Plastic Metal, M

Krinner K67 94710 15.4" Tree Stand-Green, Plastic Metal, M

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


And it does look pretty innovative – without any tools needed, three pieces of metal are snugly slotted together around your tree and fixed in place with wooden wedges. This traditional-looking gold colour stand has three securing bolds and is suitable for trees with trunks up to 11cm in diameter. We should mention that durability of the stands didn’t seem like an issue in any of the options we tested—the bigger variable was the stability, and that’s what set the Cinco and our main pick apart. If they offered something the Krinner stands didn’t, we would certainly consider them, but it appears they’re essentially inexpensive, inferior imitations.

Sometimes tinsel isn't enough to create the look you are after, and why should the tree be the only thing to light up? Using a force gauge (a simple cylinder with a calibrated spring), we pulled on each tree to see how much force was required to make it tip over.He lives in a very demanding 250-year-old farmhouse and spent four years gutting and rebuilding his previous home. A stand should have a sizable water reservoir to prevent needles from drying out and falling all over the floor. OK, so it's not strictly a stand, but this metal Christmas tree skirt merits inclusion as a visually arresting alternative to the plush fabric versions you're likely to see. Be careful to not overfill the tank, and make sure to stop before the water indicators' red zone is fully visible.

The Krinner can handle a wide range of trunk diameters (even very small ones), it’s extremely stable and it’s attractive, and the enclosed 2½-gallon reservoir has a gauge to show you its water level.

All these potted Christmas tree varieties are average or low shedding, meaning they’ll retain their waxy soft needles throughout the season. To tighten, I pumped the pedal a few times with my foot, which cranked the cable and therefore the plastic pegs around the trunk. You simply set the tree in the stand, press several times on a foot pedal, and the five very sturdy plastic claws, looped together with a heavy-gauge metal wire, tighten down against the tree trunk to set it in position. You will be pleasantly surprised to find that all of our Christmas tree holders have water reservoirs built in.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop